Cladding

Brick Slip Cladding Northampton

Brick slip cladding solves a specific problem: how do you get a genuine brick appearance on a wall that isn't built from solid brick, whether that's a timber-framed extension, an insulated wall build-up, or a structure where full brickwork simply isn't practical. We install brick slip cladding on homes and commercial properties across Northampton and Milton Keynes.

What Brick Slips Are

Brick slips are thin sections cut from real brick, or manufactured to replicate one, fixed to a wall in a pattern that reads as genuine brickwork from normal viewing distance, complete with mortar joints. Because they're a fraction of the depth of a full brick, they can be applied to structures that couldn't support or accommodate traditional brickwork, extensions built on lightweight foundations, timber frame construction, or over an existing insulation layer.

Where Brick Slips Are Commonly Used

  • Extensions where matching the existing brickwork of the main house is important for appearance and, in some cases, planning conditions

  • Timber-framed or lightweight structures that couldn't bear the weight of full brickwork

  • Over external wall insulation systems, giving a traditional brick appearance while still achieving improved thermal performance

  • Refurbishment projects where existing brickwork needs covering rather than replacing

What Installation Involves

Getting the bond pattern and joint width consistent is what determines whether brick slip cladding convincingly reads as real brickwork or looks obviously applied, so this is a detail we take seriously rather than rushing through.

  1. A survey to check the wall build-up and confirm the right fixing system for brick slips, which varies depending on whether they're going onto insulation, board or a direct substrate

  2. Fitting a mechanical fixing system or adhesive base coat, depending on the specification

  3. Laying the brick slips in the chosen bond pattern, with careful attention to consistent joint width and alignment

  4. Pointing the joints to match the mortar colour and finish you're after

Why Choose Bridgework

  • Careful attention to bond pattern and pointing for a genuinely convincing brick finish

  • Experience fitting brick slips over a range of substrates, including insulation systems

  • One point of contact from survey through to finished, pointed wall

  • A clear quote before work starts

Areas We Cover

We cover Northampton and Milton Keynes, and within roughly 30 miles of both, including Wellingborough, Kettering, Rushden, Towcester, Daventry, Buckingham, Brackley, Bicester, Aylesbury, Leighton Buzzard, Dunstable, Luton, Bedford, Newport Pagnell, Olney, Stony Stratford, Bletchley, St Neots, Biggleswade and Corby.

Also in this category

Cladding

See all 8

Brick Slip Cladding FAQs

When properly fitted with a consistent bond pattern and matched pointing, brick slips are generally very difficult to distinguish from full brickwork at normal viewing distance.

Yes, this is one of the most common reasons clients choose brick slips, and where planning conditions require a new extension to match existing brickwork, brick slips can often achieve this on structures that couldn't support full brick.

Properly installed brick slip systems are designed for long-term exterior use and perform well, though as with any cladding system, the quality of installation and detailing has a significant impact on longevity.

Yes, this is a common application, combining the thermal benefits of external wall insulation with a traditional brick appearance.

Get a Quote for Brick Slip Cladding

If you're considering brick slip cladding for your property in Northampton or Milton Keynes, get in touch for honest advice and a clear quote.

Monday to Friday, 8am to 6pm. Emergency and same-day callouts outside these hours.

07749 606444